• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

Find the perfect handle for your door, whether you are replacing your handles or adding extra security. These upvc handles are easy to install and conform to the 92mm centers required by multipoint locks.

The most important measurements to take into consideration are backplate fixing centres as well as key hole dimensions and levers. Make sure you compare these to your current measurements prior to ordering.

Lever/Pad

Lever pad handles for doors consist of the lever handle on one side and a paddle-shaped handle on the other. They are intended for use with key wind locks. However they can also be attached to multipoint split spindle door locks.

Our range of upvc handle lever pads are available in a wide range of finishes. They will be listed in the drop down list after you have identified the right handle for your door. Not all styles of handles are available in every finish though and it is recommended to check the technical drawings and sizes sections for the specific product that you want to make sure that you get the right size and fit.

When selecting a new set of upvc lever pad external door handles and locks handles it is important to ensure that they correspond to the PZ (distance between the spindle of the handle and the center of the cylinder hole) of your current multipoint door locks, as they need to be in line for the doors to remain locked, either from the inside or outside. Our handles are designed to fit most conventional cylinders, but it is always worth double-checking before purchasing.

If you are looking to upgrade to dual spindle levers you'll need to remove the handles you have already installed and take apart the lock case. This will require an additional split inline cylinder. You can purchase these separately. We have included a technical illustration in the images of each product.

It is a good idea to loosen the screws holding your door handle, and then inspect the mechanism. If the screws aren't loose enough then you might need to loosen them further. After that, you can take the spindle from the door handle and replace upvc window handle it with a new Upvc handle. Before screwing the handle into place it is recommended to check that it is in the correct position. You can do this by putting your finger into the gap between the door frame and the handle to ensure that it is level.

Lever/Lever

The lever door handles are used to operate a multi-point lock using the Euro cylinder. They are found on a variety of double upvc doors as well as wooden and aluminum doors. They are available in two types, with a lever on the interior and a paddle on the outside. Sprung - These include a spring cassette inside the backplate to help bring the handle lever into an upright position. Non-sprung: They do not have a mechanism to spring the handle lever to a horizontal angle.

To repair a sagging door handle lever you'll need to locate the detent access pin or hole. It's typically small, protruding ring, or rectangle, located on the handle base plate. Once you have located the detent access hole or pin, you can take it out using a screwdriver.

When the handle is in a horizontal position, you can re-install the screws and tighten them so that the handle remains secure on the base plate. Consider applying a threadlocking product to the threads of the screw to increase grip and prevent them from loosing over time.

There are many reasons why door handles of levers drop. The most common reason is that the fixings have been too tightened and are putting strain on the bearings of the lever, which causes it to become a bind on the door face. It could also be that the levers aren't operated at a straight angle and this is compressing the latch mechanism preventing it from fully springing back into action.

Another reason is that the sprung lever isn't working properly. This is typically due to the sprung not being in the right position within the backplate. To check whether the handle is back to horizontal, simply move it.

If the door handles aren't tight, it is essential to spot the issue quickly, since this can lead to excessive wear on the screws and eventually to the handle falling off of the base plate. It is recommended to tighten all loose screws on a regular basis to help to prevent them from loosening.

Lever/Snib

These upvc door handles are also referred to as handle sets with a 'Snib' and feature a snib button towards the top of the lever that can be pressed down to lock your door in the event that you don't have the fake lock. They usually come with a Fullex 68PZ (that's 68mm between the spindle's centre and the lever or the lock centre) door lock. We also have a selection of door handles 68PZ from manufacturers like Ferco and Fab & Fix.

You can make your home more modern by changing the handles on your doors whether you are replacing the Locking Window Handles on your existing ones or installing new ones on doors you have built. There are a variety of styles available for door window handles replacement made of upvc including the traditional levers on backplates. Other choices include straight or curved short latches, as well as dummy knobs for multi-point locks. These are ideal for French doors.

Rose door handles are circular or oval-shaped versions of backplate lever handles. These handles for doors are identified by a lever or knob that is attached to a backplate. The backplate can be removed to allow for concealed fixing.

There are a wide range of coloured and chrome finishes for these handles to enhance your door and hardware, such as hinges, knobs and bolts. Some handles come with an grub screw that can be used to connect the knob or lever securely to the spindle. Other handles are supplied with bathroom spindles that can be used to operate bathroom locks. They incorporate a thumbturn turn and release mechanism, which is ideal to use on doors for bathrooms.

Mortise

The tubular latch is most likely to be the culprit if your uPVC door handle is stuck open. This can be caused by many things but the most prevalent is an absence of lubrication within the latch plate. This can be fixed quite easily by simply opening the door and spraying lubricant on the handle and lock. It could also be that the latch plate has been dislodged from the backplate. This can be a bit more of a problem and will require a specialist to repair.

A multipoint door handle is an ideal solution to the problem of a stuck door handle. The handles are positioned through the faceplate, and are operated by either a thumb turn or key knob which activates the cam that locks the deadbolt. The handles for bifold doors are available in a variety of sizes to suit different types of upvc handle window doors and come in a variety of attractive finishes to match the hardware you already have. The handles can be purchased on the internet or through an authorized locksmith in your area. They are simple to install, with clear instructions.

You will need to know your cylinder's PZ size in order to select the right replacement handle set. This is the distance from the edge of the inner frame of the door to the central point of the handle hole in millimetres. You'll also need the type of lock on your door, whether it's a mortise or hook lock. The easiest way to find the right handles after you have the measurements is to use the filter for brands on the website. This will narrow down your choices and allow you to choose the appropriate size from there.

A typical handle set includes the handle unit with a pair of various length screws as well as drill guides and installation instructions. The smarter versions, such as the Igloohome Smart Mortise 2+ comes with an entire mortice lock that has a built-in keypad. These are more complex devices that are suited to professional installers or highly skilled DIYers. Certain handle sets come with various accessories, such as weather strips that can be used to enhance appearance of the door.